Workshop at FKF

Danny can be contacted regarding:

• If there are faults on the building and its installations. For example, power is missing from an electrical outlet, the fume cupboard gives alarm or the sink is clogged. Alternatively, an email can be sent to 8888@sdu.dk with danny@sdu.dk on cc describing the problem, room number and possibly fume cupboard ID.
• By requests for building changes/ extensions. For example, new outlet, point suction or lab conversion. Here, in collaboration with Danny, an application is prepared, which must be approved by the head of department. The task is then prioritised together with the other building plans of science.

Bo is contacted regarding (if Bo is absent and the need is acute, Lars can help):

• Ordering and changing gas cylinders
• Filling liquid nitrogen

Danny is contacted regarding:

• Gas supply failures via fume cupboards and building installations

Danny is contacted regarding:

• Electrical appliances, everything from coffee machines, HPLC, UV/VIS, MS, CD, power supplies, etc.

Lars is contacted regarding:

• Repair of mechanical parts of appliances
• Changing hoses to water or gas on appliances
• Help with glassware. For example, stuck stoppers in bottle necks.

Torben is contacted regarding:

• Everything TIG related welding, including welding of UHV pods, electrical relays, manufacture of UHV chambers.
• Repair services of mechanical parts of appliances

Bo is contacted regarding:

• Rough pump repair
• Change of oil

When time permits, we have the opportunity to build various electronic equipment or equipment for the laboratories. You can see examples of custom equipment under your contacts.

Danny is contacted regarding:

• Special cables for battery testing
• Conversion of equipment. E.g. phased out NMR robot for dipping robot
• Fiber isolated thermo couple amplifier
• Manufacture of electronics based on existing designs

Lars is contacted regarding:

• Development of holder/stoppers/mixing motor/other mechanical to be custom made. An outline of the desired element is a good starting point. The elements can be made of both plastic and metal (e.g. aluminum, stainless steel and brass). For example, holder for centrifuges or glass vials etc.

Torben is contacted by:

• building up UHV chambers and systems

Examples of custom-built equipment from the Workshop:

Diode laser 

UHV chamber for atomic source

UHV chamber for an STM (scanning tunnel microscope)

When time permits, we have the opportunity to build Labview software.

Danny is contacted regarding:

• Software for controlling older Auger electron spectroscopy equipment
• Temperature control system for MIMS
• Filter wheel control for Laser scanning microscope with Windows user interface
• Software for transferring data from oscilloscope in physics exercises

When time permits, we have the opportunity to build various electronic equipment or equipment for the laboratories. Among other things, holders have been made for flasks, samples and plastic tubes. A holder for 6 x 50 mL centrifuge tubes made on the 3D printer cost approx. DKK 7 for materials.

Lars is contacted regarding:

• Print of various plastic components with 3D-Print. Lars helps with the design and shaping of the subject.

LEO 15XX (Manual)

Bo is contacted regarding (if Bo is absent and the need is acute, Lars can help):

• Ordering and changing gas cylinders
• Filling liquid nitrogen

Danny is contacted regarding:

• Gas supply failures via fume cupboards and building installations

Abbe (Manual)

PerkinElmer 141 (Manual)

Spectropolarimeter (Article)

Shimadzu (Manual)

Vilbert Lourmat (Manual)

• Büchi 535 (Manual)
• Koflerbænk (old - Notice)
• Koflerbænk (new - Notice)
• Stuart SMP10 and SMP20 (Specifications)
• Stuart SMP10 and SMP20 (Manual)

Mohr & Co.